Affari B2B ✍️Sottoscriviper ottenere coupon fino a $ 300
Prodotto più venduto: LCD per iPhoneAcquistare ora>>

How to Extend the Life of Mobile Phone

1.Handle the problem of water ingress in mobile phones in time

If the mobile phone gets in water, it must be turned off immediately, and the battery must be removed to avoid water droplets corroding the motherboard, and then sent for repair as soon as possible. In addition, drying the moisture inside the phone with a hair dryer (only warm air can be used) can also slow down the degree of moisture corrosion of the machine board.

2.Beware of violent collision

Pay attention not to place the mobile phone in the sun or damp place; do not get close to chemicals and gases. Be careful not to drop or collide the mobile phone. Violent collisions will damage the mobile phone shell and internal components of the mobile phone, and the technical indicators will decrease. For this reason, it is recommended that you use a protective case for your mobile phone.

3.Correct charging and careful maintenance of mobile phone batteries

The maintenance of mobile phone batteries is also a problem that everyone is more concerned about. The first thing to do is to charge it properly. Since the mobile phone battery is set to a dormant state by the manufacturer before use, it is necessary to activate its battery elements in order to fully utilize the charging and discharging capacity of the battery. Therefore, when charging the mobile phone battery, be sure to use the original charger or a reputable brand charger, and use it according to the instructions. A new battery will only reach peak performance after two or three full charge and discharge cycles.

4.Clean your phone regularly

If there is too much dust on the phone, the communication quality may deteriorate, so clean the phone regularly. When cleaning the mobile phone, use a soft cloth dipped in a low-concentration tableware detergent to wipe, then soak the soft cloth in warm water, wring it out and wipe it.

 

5.If there is no special need, try to turn off the phone at night

This not only saves battery power, but also minimizes the electromagnetic radiation of mobile phones.

 

How to reduce mobile phone radiation:

1.Don't make call when yourcell phonesignal is weak. When the signal is weak, or when you are in a vehicle traveling at high speed, the radiation generated by the mobile phone will be stronger.

2.Don't bring your mobile phone into the bedroom. Don't put your phone next to your pillow when you sleep.

3.Changing hands frequently on the phone. When using the mobile phone for a long time, it is best to alternate between left and right hands frequently.

4.After dialing, stretch your arms. The moment the mobile phone is connected, the radiation is the strongest. Therefore, after answering or making a call to the mobile phone, it is best to stretch your arms, keep the mobile phone away from your body, and wait for a while before talking.

5.Do not use mobile phones in enclosed spaces. Do not use mobile phones in relatively closed spaces such as elevators, trains, and subways. At this time, the phone keeps trying to connect to the interrupted signal, which will increase the radiation to the maximum.

 

About Oriwhiz

Oriwhiz is a mobile phone LCD/OLED screen and other phone spare parts' manufacturer(factory) which is located in Shenzhen China.We are cell phone display wholesaler(Chinese supplier), offer OEM and ODM service to customers all over the world. Our products have ISO9001,CE,FCC,ROSH certificate. All of our products are manufactured by brand new materials and 100% quality test before shipping. We promise our best quality products will be delivered to our clients on time. We have professional customer service and welcome inquiry any time. Our main products include: iPhone LCD,iPhone Charging Port,iPhone Front Camera,iPhone Back Camera,iPhone ear speaker,iPhone Battery.etc.Not only iPhone related products,we also have mobile phone parts for Samsung,Huawei,Xiaomi Oppo,Vivo etc.

  • Jun 01, 2023
  • Category: Blog
  • Comments: 0
Leave a comment